There are many reasons for ceramic tiles to fall off. One of the reasons is that the quality of ceramic tile products is not guaranteed and their water absorption rate is too high, causing porcelain to fall off on the surface of the tiles. The second reason is the incorrect operation of ceramic tiles when laying them. For example, immersing ceramic tiles with low water absorption in water for too long will cause porcelain to fall off. In addition, ceramic tiles with high water absorption will also cause porcelain to fall off on the surface of the tiles due to uneven walls. .
How to make up for it?
1. Suggestions from industry professionals:
If the floor tiles are paved with uranium tiles, cover them with cement of a similar color so that the flaws will not be visible for a long time; and if they are polished tiles, go to the tile store to get a product called sodium-filled tiles. Chemicals, it is recommended not to use a cutting machine to damage the surface of the tiles, otherwise it will have varying degrees of impact on the surrounding tiles.
2. There are three types of suggestions from industry professionals:
The first type——
First of all, look at the size of the porcelain area. If the porcelain area is small, you can clean it first, and then repair it with glue of the same color; if the area is too large, just replace it with new tiles.
Second type——
Clean the area where the tiles have fallen off, then soak the tiles in water for a few minutes, then add cement and water and stir until it is as viscous as soybean oil, take the tiles out to dry, and finally knock them with a hard object Just flat.
The third type——
If the porcelain falls off, the surface will become uneven. If you do not use chemical materials of the same color or replace the tiles, you can use an iron brush or sand to smooth it.
Your suggestions are welcome for the above ways to deal with ceramic tiles falling off.
