Although high-quality ceramic tile products are a necessary prerequisite for determining the decorative effect, then the standardized paving construction of ceramic tiles can be regarded as the finishing touch in the decoration project. Therefore, ceramic tile construction and laying is not only a technical job, it is also a very particular and special craft, and it is a very creative two-dimensional space art creation. Let’s share some examples of edge finishing with metal strips. The artistic expression of brick paving construction.
The perfect integration of metal strips and ceramic tiles not only enhances the three-dimensional effect but also gives the ceramic tiles more vitality.
Using metal strips to edge ceramic tiles not only adds an extra layer of protection to the corners of the tiles, but also makes the layers between tiles more distinct.
Using metal strips to perfectly fit the edge strips to the ceramic tiles can hide and cover the existing edges and corners.
It’s not Zhongtaojun’s style to just say it looks good without giving any practical information. The following is an analysis of ceramic tile closing methods from dop design.
01
Ceramic tile floor metal strip closing
1. U-shaped partition strips can be used on floor tiles, stone, wooden floors, carpets and other different materials Compartments, made of aluminum alloy, generally 10mm in width. Today I will mainly talk about how to close the metal edges of ceramic tiles.
U-shaped closing strips can also be folded with stainless steel plates, with a width of up to 5-10mm.
2. L-shaped metal strips, the width can be reduced to 3-5mm.
3. Add a rubber strip in the middle, which can be used as an expansion joint for paving the floor
4. There are closing strips with different ground elevations on both sides. The height of the metal strip is determined based on the height difference on both sides.
02
Ceramic tile wall metal strip closing
In the past, we often used 45-degree chamfers to close the external corners of ceramic tile walls. The control of construction quality lies in the construction operations of workers, and bumps are prone to occur during use, which will cause many quality problems. There have been projects that used some external corner closing strips, but the form was relatively simple and the material was relatively low-end (commonly used PVC, etc.).
For the external angle closing of marble and other stones, due to the processability of the stone, general engineering projects use 45-degree angle matching, or edge grinding,Closing methods such as bonding are less common (unnecessary) and metal strips are used for closing.
The following is a list of metal closing methods for the external corners of some ceramic tile walls:
The closing strips of the external corners of ceramic tiles and mosaic walls have the same form, but the difference lies in the size, because the thickness of ceramic tiles and mosaics is different, and the thickness of the adhesive layer on the wall is not very large, generally around 5-8mm. , the closing strip that is suitable for tile walls cannot be used for mosaic walls.
▲The closing strip when splicing ceramic tiles, walls and paints
03
Metal strip closing at the Yin and Yang corners of ceramic tile walls and floors
The inner corner between the wall and the ground is usually closed with the wall pressed against the ground, and there should be no upward seams. Using metal closing strips will give you a neater and more beautiful effect.
When closing the external corners of tile floors such as stair steps, professional step floor tiles are usually used, otherwise the external corners cannot be processed. The use of customized metal closing strips can effectively solve the problem of closing the external corners of the steps.
For the closing method of the second node in the picture above, the metal strip can be folded and processed for the stainless steel plate. This style can also be used for closing the external corner of the wall.
The metal closing strip in the picture above is made of stainless steel plate and is processed into a T-shape. The closing strip can be used to hide paint and other methods inside.
Summary:
After a preliminary review of metal closing strips, Zhong Taojun believes that all closings cannot be used purely for closing, and should be closely related to the design plan, use of functions, etc., and combine closing with function, function, etc. Beautiful and harmonious.
The production and processing of metal closing strips is not complicated. There are currently very few domestic processing manufacturers. I think it is mainly due to everyone’s common understanding. I believe that with the promotion of good technology, the technology will become more and more convenient and reasonable. .
Sharing is to create value, but the copyright still belongs to the original author.
If there is any infringement, please contact us to delete it.
